Largest standard frame with three independent nozzles and heating
Singular XL + Tricolor + Heated Pad is a standard CzRobotics complete machine configuration for repeatable airbrush coating work. It is intended for laboratories, R&D teams, and specialized production tasks where the coating result depends on controlled path, speed, nozzle opening, air pressure, and repeatable timing.
This is the standard large-frame choice when the process needs three independent feeds plus heating. The Tricolor head does not mix colors inside the nozzle.
Best fit
- Multi-feed coating tests with three independent nozzles.
- Larger fixtures where the widest standard frame is useful.
- Materials or layers that benefit from a heated working plate.
Included configuration
- CNC Singular XL wider and longer frame.
- Tricolor Head, three independent nozzles controlled as separate channels.
- The heated working plate is included for drying-sensitive layers and repeatable lab work.
- USB G-code controller included.
- 110-240 V power adapter included.
Working area and control
The useful sprayed area for this setup is 820 x 500 mm with shared three-nozzle reach. The machine is controlled by G-code from a lab PC through the included USB controller. The standard workflow uses vector geometry, CzRobotics/Inkscape G-code preparation, and sending the program through Candle or UGS Platform.
Material notes
The system is intended for sprayable liquids with viscosity close to water or milk. Solid particles should stay below about 50 microns so the needle can close reliably and the nozzle does not clog. Fast-drying nitro paints are not recommended because they tend to dry on the needle and nozzle.
When to use the configurator instead
Choose this product when the listed configuration matches your task. Use the machine configurator if you need a different working area, head system, heating choice, rotary table, external control unit, or an application-specific recommendation before ordering.
